Automatic Aluminum Flagpole
Automatic Cone Tapered Aluminum Flagpoles - 100% Made in the USA
Automatic flagpoles will raise the flag at daybreak and lower it at sunset. This unique motorized flagpole is controlled by a photocell which enables automatic dusk to dawn operation. When the flag is lowered, it enters the flagpole through a cast aluminum entry. Once inside, the flag is protected from the weather. With the manual override, the flag can be lowered to half staff or stored inside the flagpole during inclement weather. If you have more than one flagpole, we can engineer them to operate simultaneously.
**These flagpoles are made to order with a 15-20 week lead time for production.
Standard Fittings
The electronic automatic flagpole comes equipped with a specially designed light weight American flag. These custom flags have a special heading that allows there use with the Automatic flagpole. The flags are attached and replaced through the motor access door. The truck assembly is cast aluminum and welded to the pole top. The halyard is a stainless steel cable and has two delrin flag holders along with two up/down motor stops. The 120 volt motor is mounted inside the lower portion of the pole and there is a large access door for maintenance. All poles are flange mounted and installed on four partially galvanized anchor bolts. Nut covers are provided as well.
| Overall Height |
Butt Dia. |
Top Dia. |
Wall Thickness |
Flag Size Max (one flag) |
Flag Size (two flags) |
Flag Size (two flags) |
|---|---|---|---|---|---|---|
| 25′ | 7″ | 4″ | .188″ | 4’x6′ | n/a | n/a |
| 30′ | 7″ | 4″ | .188″ | 5’x8′ | 4’x6′ & 3’x5′ | n/a |
| 35′ | 7″ | 4″ | .188″ | 5’x8′ | 5’x8′ & 3’x5′ | n/a |
| 40′ | 8″ | 4″ | .188″ | 6’x10′ | 5’x8′ & 4’x6′ | 6’x10′ & 3’x5′ |
| 45′ | 8″ | 4″ | .188″ | 6’x10′ | 5’x8′ & 4’x6′ | 6’x10′ & 3’x5′ |
| 50′ | 8″ | 4″ | .188″ | 6’x10′ | 5’x8′ & 4’x6′ | 6’x10′ & 3’x5′ |
| 60′ | 10″ | 4″ | .250″ | 6’x10′ | 5’x8′ & 4’x6′ | 6’x10′ & 3’x5′ |
| 60′ | 12″ | 4″ | .250″ | 6’x10′ | 5’x8′ & 4’x6′ | 6’x10′ & 3’x5′ |
| 70′ | 12″ | 4″ | .250″ | 6’x10′ | 5’x8′ & 4’x6′ | 6’x10′ & 3’x5′ |
Installation Guidelines:
- All sizes are shoe base Foundations
- Conduit Generally Runs from center of footing into Pole
- Electric components come pre-set in pole
- Truck Top is Pre-Welded onto Shaft
- 25' to 35' Are One Piece Shaft
- 25' to 35' Are Pre-Shipped Assembled with All Parts Ready To Use
- Foundation size is completely custom per job. Depending on local soil and wind conditions. Please speak with a structural engineer.
- Grounding must be done separately. Pole does not include any grounding / bonding equipment.