Flagpole Hardware

You MUST Select The Number of Characters For Pricing To Be Accurate Pricing per plaque is size based off the flagpole diameter then add $5.10 per c...

A Black on Brass plate that can be engraved to personalize any item you stick it to.  Features: 1.5" Tall by 5" Wide 100% Brass Backing Beautifull...

As of 10-1-22, this item has been discontinued. An aluminum brightener from your local auto parts store is the same thing. If you do not have anyth...

For touching up aluminum flagpoles. 12 ounce aerosol spray can.

For mounting outrigger & vertical wall mount brackets Features: 5/8" x 6" Size Includes 1 Threaded Rod, 1 Expansion Shield, 1 Acorn Nut, 1 Was...

For mounting outrigger and vertical wall mount brackets. Features: Zinc Plated Steel Includes 1 Acorn Nut, 1 Hex Nut, 2 Washers & 2 Lock Washers

Features: Use at the top of your internal cable arrangements or to stop ropes/cables from twisting  Heavy Duty Commercial Grade Stainless Steel ...

Features: 100% Stainless Steel 316 1760 lbs Holding Force 8MM Thickness 3/8" Opening 11/16" Inside Width 2 7/8" Overall Length  

Strong Steel Rope Thimbles for 8'x12' Flags & Larger.   For Flags 6'x10' & Smaller, we recommend using Brass Grommets

Features: Use to attach cable to a stainless steel winch Fits 1/8" Diameter Cable

Includes lock & keys The door for 25'-40' flagpoles is 1 1/4" by 6". It is also a discontinued product so no refunds or exchanges are accepted ...

50% restocking fee applied to this item. 6" Measurements 5 1/4" Tall by 3.5" Wide 7" Measurements 6 1/8" Tall by 4 1/8" Wide 8" Measurements 6 3/16...

This unit is designed for 5" diameter poles and is used with rope style internal halyard systems.Each unit consists of a hinged door mounted to the...

This set includes 1 lock and 2 keys. These lock and keys work for any of the doors listed HERE

This set includes 1 lock and 2 keys.

For replacing the locks in Fiberglass Internal Cam Cleat Flagpoles.

Flagpoles which utilize an 8'x12' flag arrangement or larger it is recommended that a shock spring and safety cable be used. The spring is zinc pla...

This kit contains 5' long by 1/2" diameter copper clad rod, one 3' long by 1/2" diameter copper wire plus one connecting bracket. Use this kit to g...

Constructed of 1/8" stainless steel aircraft cable with a stainless steel thimble attached at each end with 2 copper crimps. These flag arrangement...

Drilled to be strung onto 1/8" stainless steel aircraft cable.

Constructed of 3/8" diameter stainless steel rod. All sizes are supplied complete with a stainless steel fitting which attaches to the grommet of t...

For Atlantic Fiberglass / Tidaflag flagpoles with an internal winch.

For Atlantic Fiberglass / Tidaflag flagpoles with an internal winch.